Welcome to Stereotype Hifi, get more out of the music you love

Myryad Z240 Integrated Stereo Amplifier

Be the first to review this product

Availability: In stock


Quick Overview

One of things we often tell clients is, "don't buy off the spec sheet" - with the Myryad Z240 this a perfect example, the stated 50W amplifier has huge power reserves and drives almost any speaker in our demo room with a very clean sound and tight bass. We love this amp.

Myryad Z240 Integrated Stereo Amplifier

More Views

* Required Fields



The new dynamic, 50 Watts per channel Z240 amplifier boasts a luxuriously thick "Z200" brushed aluminium facia. Its new white LED indicators complement the uncluttered styling to produce a sophisticated look and feel.

The Z240 delivers extended, weighty and controlled bass, open and detailed mid-range, and added top-end air and sweetness. This superb sound is achieved with the help of an optimally shortened signal path featuring just one high speed, low loss series capacitor in each channel and discrete "soft recovery" ultra-fast rectifiers which improve dynamic range by reducing induced RF "noise".

Even the internal wiring, from the power amp outputs to the speaker terminals, has been upgraded to the acclaimed QED Silver Anniversary XT cable.


Myryad's Design Principles

The design of a good‐sounding amplifier, or any hi‐fi product, requires careful attention to many details. If just one key feature is overlooked it could turn a great product into a mediocre one. The designer must always design the product as a whole and not focus too much any one 'favourite' area.

Careful and precise engineering can take you 90% of the way to a top design and without it the design will fail. But it is the final 10% which distinguishes the best hi‐fi marques. Experience and a deep understanding of the critical aspects of an amplifier's performance lead to the best circuit topologies and physical layout. Again, looking at the product as a whole is important. An amplifier and its power supply are one ‐ and must be designed as such.

The final subtleties of tonal balance musicality and soundstaging, which distinguish even the best amplifiers, can be influenced by component type and quality. Although the primary specification of all components must be to meet engineering requirements, that still leaves a great deal of choice available to the designer.For instance, Myryad's use of precision metal film resistors and polypropylene film capacitors ‐ even in its budget products in key locations ‐ is based on many hours of listening. The use of parts such as these make a significant contribution to the open and transparent yet warm and musical sound exhibited by all Myryad's products.

This design philosophy is applied equally to all Myryad's products, from the least to the most expensive. In a budget amplifier the cost constraints are more onerous and the quality of the sound must be compatible with lower cost sources and loudspeakers. At the high‐end an amplifier must perform impeccably with the most detailed sources and the most transparent (and often taxing) loudspeakers while still meeting the approval of the critical ears of the high‐end listener. In either case the same design philosophy guides all Myryad products to ensure they sound and look beautiful.

Additional Information

Output Power (RMS) 8 ohms (< 0.1% THD) 50W
Phono Input Yes
Analog In Tape 1, Tape 2, CD, DVD, Tuner
Preamp Out Yes
Speaker A/B No
Dimensions (mm) 436 x 78 x 316mm
Weight (kg) 6.7

You may also be interested in the following product(s)

Myryad Z20 DAC

Myryad Z20 DAC

Regular Price: NZ$999.00

Special Price NZ$699.00

Myryad Z210 CD Player

Myryad Z210 CD Player


Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.